Free & fast delivery on all mainland UK orders over £50
0 Reviews

125W ETFE Flexi Solar Panel - Top Exit

Featuring a tough, double-sided, laminated outer layer, the 125W Flexi ETFE solar panel is designed and built for durability. High weather and corrosion resistant, the panel is IP67 rated and tested to ASTM B117 - ISO9227. That’s proven exposure to saltwater spray for more than 1000 hours as well as accelerated Ultraviolet (UV) testing to ISO 4892.... View more

Add Charge Controller
Which controller do I need?
Product code: n/a
Product information


Product support

Find fitting instructions, advice on expanding a solar system and answers to frequently asked questions on our dedicated support page for PV Logic Flexi ETFE Solar Panels.

The benefits of ETFE

The dimpled surface pattern in our ETFE Flexi panels deliver excellent light transmission to the high efficiency monocrystalline solar cells maximising solar power generation.

The panels are suitable for flat and slightly curved surfaces and perfect for campervans and leisure vehicle roofs where panel weight needs to be minimised.

Completely waterproof

Each panel is assembled to ensure complete encapsulation. This ensures the six layer heavy duty laminate protects the solar cell circuit from extreme conditions. The junction box is also injected with special silicon, guaranteeing no water ingress.

Superior design

There are no square edges on a PV Logic flexi solar panel! Rounded panel corners and a unique curved junction box provide superior adhesion, no snag lamination and no sharp edges. The junction box is mechanically fixed in addition to being bonded to the panel. Strain relief is provided for the fitted UV stabilised PV cable ensuring it cannot be accidentally pulled from the junction box. 

Easy fix

The flexi range can be bonded to flat or slight curved surfaces (3cm curve per metre) such as painted aluminium, metal, GRP and fibreglass using Teroson MS939 bonding agent.  

Installation method

Please only use the glue pattern below for land based vehicles and applications (this is covered in more detail in the instructions), which ensures air flow under the panel is achieved preventing heat build-up and potential warping under extreme heat.

Add a controller

The PV Logic range of charge controllers includes the 10A and 20A dual battery PWM models and, for high performance and the ultimate in rapid solar charging, there is the MPPT Pro series. Both are capable of charging 12V and 24V batteries.

Our MPPT Pro charge controllers increase solar yield by up to 20% over a standard charge controller by artificially modifying the voltage from a solar panel system to actively match any battery's requirements. This means that whatever the weather conditions your panels will deliver maximum power with minimum electrical loss.

The MPPT charge controller comes with its very own free-to-download Bluetooth app (Apple and Android) to display how the solar system is performing.

Complete your kit with fixing accessories

Buy PV Logic stands, brackets and fixings here 


High efficiency crystalline cell for all weather charging
High efficiency crystalline cell for “all weather” charging
Water resistant, robust construction for outdoor use.
Water resistant, robust construction for outdoor use.
In built diode protects against battery discharge
In built diode protects against battery discharge
Salt spray tested
Salt spray tested
Tough and robust
Tough and robust
UV light tested
UV light tested
2 year product warranty
2 year product warranty

Technical Specification

Power Size Weight
Watts per
day (W)
Amp hours
per day (A)
Pmax (WP) Vmp (VDC) Imp (A) Voc(V) Isc(A)
55W ETFE Top Exit 600 x 600 x 4mm 2.6 330 19.32 10A 55 17.1 3.22 20.0 3.78 Download Tech Spec
60W ETFE Top Exit 395 x 880 x 4mm 2.8 360 19.8 10A 60 18.2 3.30 21.3 3.46 Download Tech Spec
125W ETFE Top Exit 665 x 1035 x 4mm 4.6 750 38.7 20A 125 19.4 6.45 22.1 6.77 Download Tech Spec
125W ETFE Rear Exit

665 x  980 x 4mm

5.1 750 38.7 20A 125 19.4 6.45 22.1 6.77 Download Tech Spec
180W ETFE Top Exit

670 x 1520x 4mm

6.8 1080 52.7 20A 180


8.79 24.0 9.22 Download Tech Spec
180W ETFE  Rear Exit 670 x 1480 x 4mm 7.3 1080 352.7 20A 180 20.5 8.79 24.0 9.22 Download Tech Spec


  • Vmp - Nominal voltage
  • Imp - Nominal current
  • Isc - Short circuit current
  • Watts and Amp hours/day based on six hours of average daily peak sunlight hours.

1 x 125W ETFE semi-flexible solar panel - top exit
1 x 4m cable (attached)
1 x fuse & holder
1 x instruction sheet


Two year product warranty 

Please note 

All of our semi flexible panels will only bend from the top (has the cable and logos) to the bottom a maximum of 10% of panel length.
Bending the panel greater than this, or trying to bend the panel from left to right will possibly damage the panel and also invalidate your warranty.

Delivery & returns


UK: Standard delivery for orders under £50 is £5. Delivery is free for all orders over £50 (3 to 5 day service) 

Next day delivery (UK only): Charged at £7.50 if ordering before 2pm *

Delivery to Europe, the US and rest of the world: Please contact for costs and delivery options

* If ordered after 2pm, your order will ship the following day. If ordered on a Friday your order will arrive on a Monday, or if ordered after 2pm the order will ship on the Monday, as long as it is not a bank holiday.


Your Right To Cancel
You have the right to cancel your order within seven working days of delivery and return the goods supplied to us for a refund of the price of the goods. You must notify us in writing during this period of your intention to cancel by

Letter to -

Solar Technology International Ltd.
Unit 6
Station Drive
Nr Tewkesbury
GL20 7HH

Tel – 01684 774000

Or email

Any goods supplied must be returned to the address above at your own expense within the seven days of your notice to cancel. Providing the goods are returned in their original, unused condition and the packaging is undamaged, you will receive a full refund of the price of the goods within 30 days of us receiving the goods back.

Unless the goods are defective, damaged or not as specified on your order acknowledgement, you are responsible for the cost of returning the goods. We recommend that you use Recorded Delivery, as proof of shipping is not proof of receipt. If, however, the goods are faulty then the postage costs will be refunded. Please provide us with a copy of the postage receipt.