PV Logic Flexi solar panels are the ultimate choice for the challenges of the marine environment
Benefit from the semi-flexible panel's self-healing top surface
The ETFE layers give the 55W flexi extra resilience in really tough conditions. ETFE has a memory effect or self-healing capacity in the event the panel comes into contact with branches etc, thus ensuring any slight abrasions are ‘healed’ within a few hours. During production the ETFE is dimpled to further protect the panel.
The 55W panel has stainless eyelets in each corner for securing the panel with stainless steel fixings.
Each panel is assembled to ensure complete encapsulation. This ensures the six layer heavy duty laminate protects the solar cell circuit from extreme conditions. The junction box is also injected with special silicon, guaranteeing no water ingress.
There are no square edges on a PV Logic ETFE flexi solar panel! Rounded panel corners and a unique curved junction box provide superior adhesion, no snag lamination and no sharp edges. The junction box is mechanically fixed in addition to being bonded to the panel. Strain relief is provided for the fitted 4m UV stabilised PV cable ensuring it cannot be accidentally pulled from the junction box.
- Vmp - Nominal voltage
- Imp - Nominal current
- Isc - Short circuit current
- Watts and Amp hours/day based on six hours of average daily peak sunlight hours.
Contents (panels kits)
1 x 55W ETFE semi-flexible solar panel
1 x 4m cable (attached)
1 x 10A in-line charge controller
1 x Wago terminal connector
1 x Connecting cable with crocodile clips
1 x Connecting cable with ring terminals
Four year product warranty
Two year product warranty
All of our semi flexible panels will only bend from the top (has the cable and logos) to the bottom a maximum of 10% of panel length.
Bending the panel greater than this, or trying to bend the panel from left to right will possibly damage the panel and also invalidate your warranty.